6
Uploading the first sketch to the board
4.
Once the ESP32 core has been installed, open the tools menu and select the ESP32 Dev module board by
going to:
Tools > Board:"..." > ESP32 Arduino > ESP32 Dev Module
5.
Connect the Whadda ESP32 module to your pc using a micro USB cable. Open the tools menu again and
check if a new serial port has been added to the port list and select it (
Tools > Port:”…” >
).
If this is not
the case
, you may need to install a new driver to enable the ESP32 to properly connect to your
computer.
Go to
https://www.silabs.com/developers/usb-to-uart-bridge-vcp-drivers
driver. Reconnect the ESP32 and restart the Arduino IDE once he process has finished.
