Wfly WFT06II, Инструкция по эксплуатации

Страница: 18 / 32

06- HOLD Throttle hold
07 CUT throttle cut
●
Function description:
During landing, use throttle hold function to fix the throttle at a low level. The range of the throttle normally
set between -75% to +75%. For safety reason, when tuning the plane or helicopter on the ground, the throttle
POS need to be set to -75%, and hold the throttle, to avoid any mis-operation.
●
Setting method:
When the setting active, use +/- button change INH (inhibit) into ON/OFF. Under this situation, when the
switch pushes to ON or OFF, the screen will display accordingly.
1, select HOLD 06 under setting mode
2, press +/- button to change status, press UP/DOWN button to set the throttle position (POS).
3, press and hold Menu to exit or press menu to switch to next item.
●
Function description
Throttle cut means after flying to turn off the engine. It is controlled by a switch. Active this function and the
engine will stop running when the switch turns on.
●
Setting method
1. select CUT 07 under setting mode
2. press +/- to adjust the status, push up/down button to set the position POS and RATE.
3. Press and hold Menu to exit or press menu to switch to next item.
Helicopter
18