WFE Technology Corp. WAFERLOCK L379 Скачать руководство пользователя страница 13

WFE Technology Corp.

13

Federal Communication Commission Interference Statement

This equipment has been tested and found to comply with the limits for a Class B digital 
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide 
reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not 
installed and used in accordance with the instructions, may cause harmful interference 
to radio communications. However, there is no guarantee that interference will not occur 
in a particular installation. If this equipment does cause harmful interference to radio or 
television reception, which can be determined by turning the equipment off and on, the user 
is encouraged to try to correct the interference by one of the following measures:
. Reorient or relocate the receiving antenna.
. Increase the separation between the equipment and receiver.
. Connect the equipment into an outlet on a circuit different from that to which the receiver 
is connected.
. Consult the dealer or an experienced radio/TV technician for help.

FCC Caution: To assure continued compliance, any changes or modifications not expressly 
approved by the party responsible for compliance could void the user's authority to operate 
this equipment. (Example - use only shielded interface cables when connecting to computer 
or peripheral devices).

This device complies with Part 15 of the FCC Rules. Operation is subject to the following 
two conditions:
(1) This device may not cause harmful interference, and (2) This device must accept any 
interference received, including interference that may cause undesired operation.

Содержание WAFERLOCK L379

















Отзывы: