B E L 2 7 0 F
U L L Y
A
U T O M A T I C
H
O T
M
E L T
G
L U E
C
A S E
S
E A L E R
12
65-07-6 3/6/2007
Important
: Do not remove or reposition the clamp collars on the cross width adjustment screw as these are set to
prevent the sprockets from contacting each other and/or to protect other machine components.
The optional BEL 270 Spare Parts Maintenance Kit contains all of the parts necessary for maintaining the
Uni-
Drive
system. Contact the factory or your local Belcor Distributor for further details.
G
EAR
R
EDUCER
M
AINTENANCE
Worm gear reducers and gear motors should be inspected regularly for evidence of oil leakage, noise or vibration
to ensure maximum performance and service life.
Check for the following.
•
OIL LEAKAGE – Check oil fill and level plugs and housing bolts, tighten if necessary, replace oil seals if
required.
•
OIL TEMPERATURE - Check reducer for higher temperatures than normally encountered and that are not
caused by a rise in ambient temperature. Possible causes are low or high oil levels and abnormal machine
loading.
•
SOUND LEVEL AND VIBRATION - A change in sound level or excessive vibration can indicate low oil
level, abnormal loading or worn components.
•
DIRT ACCUMULATION - Excessive accumulation of dirt or grease will affect the proper cooling of the
unit.
