WD-6C
Rev. 7.0 (202202)
Operating instructions
38
When you contact service personnel, you will need to provide the following
information:
•
Machine type and model.
•
Machine serial number and date when the machine was installed.
•
A brief description of the problem. Are any fault codes shown in the
display?
•
What happened/was being done immediately before the fault occurred?
The machine is not cleaning
properly.
The rinse and wash nozzles are
clogged with dirt.
Check and clean the nozzles.
There is too little detergent.
Check the amount of detergent. The
hose (“thick”) must be submerged in
liquid and the filter in the hose must
be clean.
The water in the tank is too dirty.
Change the water.
Foam forming in the tank.
Check that the washing temperature
is not too low and that the correct
detergent is being used.
Dirt has dried on the dishware to be
washed.
Soak the dishware before washing.
The dishware is incorrectly
positioned in the baskets.
Use the correct type of washing
basket and accessories to ensure
that the dishware is correctly
positioned.
Detergent and drying agent of
another make than usual are used.
Use the same make and type as
before. Rinse the hoses and pumps
with water if necessary.
The dishware has tipped over in
the baskets.
The dishware is incorrectly
positioned in the baskets.
Put the dishware in the correct
position.
Light dishware need washing.
Use a net grid to hold the items.
Dishware does not dry.
The rinse nozzles are blocked.
Check and clean the nozzles.
Too little rinsing agent.
Check the amount of rinsing agent.
The hose (“thin”) must be
submerged in liquid and the filter in
the hose must be clean.
The washed items have been left in
the machine.
Remove the washed items once the
programme has ended.
PROBLEM
CAUSE
ACTION
Содержание WD-6C
Страница 2: ......
