WD-4S
Rev. 5.0 (201912)
Operating instructions
39
4.3.2
Daily cleaning
Emptying with internal cleaning
•
Check that the machine is in standby mode.
A=Standard
B=Glass washing (option)
•
Open the door.
•
Remove the tank strainers (9) and the active filter (14) (option).
•
Close the door.
•
Press (6) to start the emptying programme.
•
When the tank is empty, the internal machine rinsing will start automatically
if the door is closed, the machine will turn off without internal machine rins-
ing when the door is open.
•
The machine is now switched off automatically, the lighting on ON/OFF (7)
fades to a faint red LED and an audible signal sounds.
When the machine is switched off, the incoming water flow is shown on the panel.
Then the number of washes made after the last start-up is shown.
A8S
A8G
A
B
drain
machine_rinse
waterflow
pos
XX