WD-100GR
Rev. 5.0 (202207)
Operating instructions
60
When contacting the service company, the following details relating to the ma-
chine should be provided:
•
Machine type and model
•
Machine serial number and installation date
•
Short description of the fault/problem
•
What happened immediately before the fault occurred
The display indicates that the
anti-crushing mechanism
has been triggered.
Object preventing one door from
closing.
Remove the object.
The machine does not start
washing.
The door / doors are open.
Close the door.
Noise.
Low water level. Foam in the
tank.
Check the level. Change the water.
The machine stops in the
middle of the wash cycle and
starts taking in water from the
washing pump
The level pipe’s rubber sleeve is
not sealing against the bottom
plate.
Adjust the level pipe. Check that the rubber
sleeve has not been damaged. Change the
rubber sleeve if it is damaged.
The machine is not cleaning
properly.
The rinse and wash nozzles are
clogged with dirt.
Check and clean the nozzles.
There is too little detergent.
Check the amount of detergent.
The water in the tank is too dirty.
Change the water.
Foam forming in the tank.
Check that the washing temperature is not
too low and that the correct detergent is be-
ing used.
Programme with too short a
wash time selected.
Choose a wash program with a longer wash
cycle.
The program without granules
has been selected.
Select a wash program with granules.
Dirt has dried on the dishware to
be washed.
Soak the dishware before washing.
The dishware is incorrectly posi-
tioned in the basket.
Use the correct type of accessory to ensure
that the dishware is correctly positioned.
Detergent and drying agent of
another make than usual are
used.
Use the same make and type as before.
Rinse the hoses and pumps with water if
necessary.
Granules are sticking to the
washed items.
The rinse nozzles are blocked.
Clean the nozzles.
There is too much foam in the
machine.
Check to see how clean the wash water is.
Change the water if necessary.
The granules end up in the
wrong tank.
The cover plates and/or filter are
not in place in the tank or have
been incorrectly fitted.
Fit cover plates and strainer(s). Check they
are correctly located and cover the tank.
There is too much foam in the
machine.
Check to see how clean the wash water is.
Change the water if necessary.
The wash water is too dirty.
Change the water.
Dishware does not dry.
The rinse nozzles are blocked.
Check and clean the nozzles.
Too little rinsing agent.
Check the amount of rinsing agent. The
hose must be submerged in liquid and the
filter in the hose must be clean.
PROBLEM
CAUSE
ACTION
Содержание WD-100GR
Страница 2: ......
