WEVI CW-5, Руководство по эксплуатации

Страница: 10 / 24

‐
9
‐
CHAPTER 5 SPECIFICATION
5.1 Basic Specification
Wireless LAN Interface
Standard IEEE802.11a (ARIB STD-T71)
Transmission method Orthogonal Frequency Division Multiple
Modulation (OFDM)
Frequency
5,150
〜
5,250MHz (4ch) Auto-select
5,150
〜
5,350MHz (8ch) Auto-select U.S. Spec
Data transfer speed 6/12/24Mbps Auto Switch
Encryption AES Encryption
Transmission power (max)
*1 Japan
：
180mW/18MHz
U.S.
：
50mW/20MHz
Europe
：
200mW/20MHz
Reception sensitivity -74dBmW typ.
*1: The max power setting is governed by the 802.11a regulations of each
country.
5.2 Input
・
Output Specification
CW-5TX
（
transmission side
）
Specification
Video / Audio
Video signal NTSC/PAL/SECAM auto selection
Composite Input 1.0Vpp/75 Ω
Audio Input 0dB 10K Ω Balance
Compression method MPEG-2
MPEG bit rate 4/8/14Mbps Auto switch
Infrared Signal
＊
for pairing operation
Signal carrier frequency 38KHz
Display
・
Operation
Power switch Turns the CW-5 Power ON/OFF
Note: If a battery is attached the battery power is
throughput to the output side even when the CW-5 is off
Pairing Switch As shipped the CW-5 TX & RX are preset paired
For manual pairing push down the pairing set switch
The most recent paired information is always retained