17
Set-up and Operation
that detects daylight and darkness. Turn the knob towards (
☼) to
have the motion sensor turning on the light during day and night,
turn it to (
) to have the light activated only at night.
Note: If the light turns on in bright light conditions, turn the control
towards (
). However if the light does not turn on at night time,
turn this control towards the (☼) icon. This may when there are
bright street lights or house lights.
Final Adjustment, Alignment and Test
1. Point the motion sensor towards the area in which you want to
detect motion.
2. Turn the TIME knob (10) to the minus (-) position. When you
are walking slowly within the detection area, the sensor can
detect thermal radiation emitted by you and then turn on the
light.
3. Test the coverage of the area by walking slowly around the
area and readjust the sensor if necessary. Please keep in mind
that the motion sensor does not detect directly oncoming
movement very well.
4. Point the LED floodlight towards the area you want to illumi-
nate.
