11
Using
Inserting/Replacing the Batteries
(not included)
1. Remove the lamp from the mounting bracket (4). The lamp has
two battery compartments (3) which are located at the rear side
of the lamp. Press the latch of a battery compartment cover and
remove the cover.
2. Insert 3 batteries of the type LR03 (AAA) into each battery
compartment. Pay attention to the proper polarity of the batteries.
The polarity is printed inside the battery compartment.
3. Close the battery compartments with the covers and attach the
lamp to the mounting bracket.
Replace the batteries when the light of the LEDs gets weaker.
Notes:
This lamp is designed to operate using either 3 or 6 batteries.
When using only 3 batteries, be sure to place all 3 batteries in the
same battery compartment.
The unit’s output brightness will be the same whether using 3 or
6 batteries. However, the run time from 3 batteries will be less.
On/Off Key
Battery
Compartments
Содержание 82 74 07
Страница 3: ...III bersicht Overview 6 7 5 3 4 3 2 1...
Страница 20: ...16 Notizen Notes...