Wetelux 80 35 68, Инструкция по эксплуатации

Страница: 14 / 22

10
Operation

The LED spotlight must be protected on the sub-distribution
board by a 10/16A fuse. An earth leakage circuit breaker must be
installed before this (FI protective switch).

The LED spotlight must be disconnected from the power supply
during installation. It is not sufficient to just turn off at the light
switch!

Turn the power off by removing the corresponding circuit fuse or
switch off at the circuit breaker. Secure it against an unauthorised
re-start, e.g. with a danger sign. In addition, switch off the associ-
ated earth-leakage circuit breaker.

Check that the mains connection is current free with a suitable
tester.

The earth protection cable must be connected when installing the
LED spotlight.

Do not install the LED spotlight, if the LED spotlight is replacing
an existing light and there is no protective earth cable available.
First, draw a new mains cable.

Where the protective earth is not connected, a fault with the
mains voltage might result in the metal housing of the LED spot-
light becoming live. There is a risk of a life-threatening electric
shock!