Wetelux 80 35 67, Инструкция по эксплуатации

Страница: 12 / 18

8
Using
Mounting/Installation
 Remove the four screws from rear side of the LED spotlight and
open the spotlight.
 Turn off the nut from the cable gland (2) and lead the power ca-
ble through the cable gland at the bottom side of the housing.
The turn on the nut again.

Connect the three wires
from the power cable (4), as
pictured, with the lustre
terminal respectively with
the earth screw inside the
housing of the LED spot-
light.
 Reassemble the housing in
reverse order and secure it
with the four screws.
 The LED spotlight can be used indoors as well as outdoors. The
LED spotlight is protected against water jets (IP65).
 Install the wall mount (3) with two or three suitable screws se-
curely to an appropriate place.

Tilt the spotlight to the desired angle and tighten the screws at
the hinge of the wall mount to secure its position.