Wetekom 82 52 28, Инструкция по эксплуатации

Страница: 13 / 18

9
Operation
Before first Use
Take the unit out of the package and dispose of the packaging
material (e.g. plastic bags) or store it out of the reach of children.
There is a danger of suffocation!
Exchanging Attachments
The cutting attachments become very hot during use. Before
exchanging the attachment, allow cooling down completely!
1. Pull the used cutting attachment straight from the handle (3).
2. Put the desired cutting attachment straight from above into the
socket of the handle (3). Do not tilt the attachment. Do not use
force when inserting it into the socket.
Operation
1. Install the desired cutting attachment at the handle (see
above) and rest the unit on the support (7).
2. Plug in the power supply (6) into a mains socket.
3. Connect the power supply socket (4) with the power supply.
The inserted cutting attachment heats up within a few seconds
to its operating temperature. It is ready for use.
4. Lead the cutting tool to the workpiece and perform the desired
cuts.
5. Use the ON/OFF switch to switch
off the unit. Rest the unit on the
support and allow cooling down
(fig. 1). Unplug the power supply
from the mains socket.
Fig. 1