Wetekom 17 74 93, Инструкция по эксплуатации

Страница: 18 / 22

14
Operation
Reset Scale
Press the TARE key (3) to reset the scale to zero.
Weighing
1. Turn on the scale.
2. Select the desired measuring unit.
3. Press the TARE key (3) to reset the scale.
4. Place the material to be weighed on a solid surface and attach it
to the weighing strap of the scale (6).
5. Lift the scale by the handle (1) so that the material to be weighed
is raised from the surface for a few seconds.
6. The weight will be shown on the display. After the weight has
been recorded accurately the word Hold will appear and the
measured weight is freeze framed on the display.
7. Set the material to be weighed on the floor and detach the scale.
8. The LC display shows ERR if the material to be weighed weighs
more than 40 kg. Quickly remove weights from the scale to avoid
damaging the scale.
Powering OFF

The scale powers off automatically after approx. 30 seconds
when it is not in use.

Press the ON/OFF key (5) to turn the unit off manually.