![background image](http://html1.mh-extra.com/html/wet-sounds/ww-8ch-ld/ww-8ch-ld_owners-manual_966467004.webp)
CUT OUT
DIMENSIONS
MOUNTING INSTRUCTIONS
REMOTE
MAIN UNIT
STEP 1: Locate desired location. Please refer to
dimensions and check for clearance prior to
cutting or drilling.
STEP 2: Cut hole using the supplied cut out
dimensions.
STEP 3: Route wires through hole and snap in place.
TIP:
It is good practice to cut the hole smaller than
needed, then enlarge using a le as needed. This
will ensure a secure t.
STEP 1: Locate desired location. Please refer to dimensions and check
for clearance prior to cutting or drilling.
STEP 2: Use supplied screws to secure unit.
0.86"
1.41"