AMPLIFIER ADJUSTMENTS
4
AMPLIFIER ADJUSTMENTS FOR THE ST SERIES SUBS
1 - AUTO TURN ON SWITCH
The “REM” Setting
is the most reliable way to turn the ST series subwoofer
on and off, but if the source unit does not have a Remote Output wire then
either the “AUDIO” or “DC OFFSET” setting can be used. Not all source units
are the same, so three different turn on options are provided. Select the
setting that works best with the source unit in the system:
“REM” Setting
is used when the source unit has an output that supplies
+12V when powered ON and returns to 0V when powered OFF. Newer model
Wet Sounds Stealth Sound Bars have this feature and should be used in this
way.
“DC OFFSET” Setting
senses voltage change when the source unit is
powered on and off. This setting does not depend on music. This setting
should be used if the “AUDIO” setting does not properly turn on the ST series
Subwoofer.
Wet Sounds STEALTH ST-AS SERIES SUBWOOFERS Installation / Owner’s Manual
