Wet Sounds STEALTH ST-AS SERIES SUBWOOFERS Installation / Owner’s Manual
2
INSTALLATION INSTRUCTIONS
IMPORTANT! BEFORE MAKING ANY CONNECTIONS, DISCONNECT THE
BATTERY POWER UNTIL THE INSTALLATION IS COMPLETED TO AVOID
POSSIBLE DAMAGE TO THE ELECTRICAL SYSTEM.
INSTALLATION
Mounting
Find the proper spot in your vehicle to mount the subwoofer enclosure. The
enclosure should be mounted securely to a flat surface using the supplied
hardware. For the ST-AS10, the mounting holes are integrated into the
enclosure. For the ST-AS6, install the supplied mounting feet to the enclosure
using the supplied hardware. The feet can be rotated to fit the floor of the
vehicle.
WIRING THE HARNESS FOR THE ST SERIES SUBWOOFER
If installing on a gas or diesel vehicle –
wire the Negative
(Black)
wire
(2)
on the subwoofer harness to the Negative
(-)
battery terminal and the
Positive
(Red)
wire
(1)
on the subwoofer harness to the Positive
(+)
battery
terminal.
If installing on an electric vehicle
– switch it into TOW mode. Wire the
Negative
(Black)
wire
(2)
on the subwoofer harness to Ground on the DC-DC
Converter and the Positive
(Red)
wire
(1)
on the subwoofer harness to the
Positive
(+)
post on the DC-DC converter.
Note: DC-DC Converter is required on electric vehicles to avoid damage to
the accessory and the vehicle!
