4
SAFETY
CAUTIONS and WARNINGS
Throughout the operator’s manual, you will find Cautions and Warnings.
Warnings remind you to be especially carefulto avoid personal injury.
Cautions are provided to prevent you from making an error, which could damage the
vehicle and possibly cause personal injury.
S
afety Reminders
1. Make sure the GO-4 operator has read the manual and understands it.
2. Do not let children operate vehicle.
3. This vehicle is to carry one person ONLY. No riders!
4. Use a seat belt for optimum safety. - It's the Law!
5. Keep both hands on steering wheel whenever possible.
6. Keep legs and arms in the vehicle when it is in motion.
7. Always shut off engine when vehicle is being refueled.
8. Never smoke when refueling or servicing vehicle.
9. Always dim headlights when approaching people or other vehicles.
10. Never make sudden turns or stops when not necessary.
11. NOTE: The cornering ability of three-wheeled vehicles is not as great as that of similar 4 –
wheeled units. A warning buzzer will sound if the vehicle is operating on too much of a slope or
if a corner is taken at too high a rate of speed.
12. Always keep within load limits and never overload it.
13. Always run the vehicle in open areas with plenty of fresh air to prevent carbon monoxide
poisoning.
14. Always slow down before you turn and when travelling over rough areas.
15. Always signal lane changes and turns.
16. Always wear a helmet where law states such as required.
NOTE: The GO-4 is classed as a motorcycle.
Operating Precautions for the Catalytic Converter
1. Use only unleaded fuel in your vehicle.
2. Do not park the vehicle near or over flammable objects such as gas.
3. Do not operate engine at high idle speeds for long periods of time while in “P” or “N”
4. Do not allow your vehicle to run empty of fuel.
5. Do not operate the vehicle when there are signs of engine malfunctions, such as misfire or
noticeable loss of power to the engine.
6. Do not coast with engine off.
7. Do not go down steep grades in gear with ignition off.
8. Do not modify or tamper with emission control system. Let a qualified technician do the
adjustments.
Contact Westward Industries for Manuals and Documentation. Do not copy.
