28
Place Jack In The Center Of Front Cross Tube Or On Either Side Of The Rear
Subframe
Service and Maintenance – cont’d
Front Tire
1.
Park on a level surface.
2.
Block rear wheels and place transmission in PARK.
3.
t
n
o
r
f
e
h
t
d
n
i
h
e
b
y
lt
c
e
ri
d
r
e
b
m
e
m
s
s
o
r
c
e
m
a
r
f
e
h
t f
o
r
e
t
n
e
c
e
h
t
o
t
e
l
b
i
s
s
o
p
s
a
r
a
e
n
s
a
k
c
a
j
a
e
c
a
l
P
wheel.
4.
Before jacking the vehicle, loosen the bolts on the front wheel and the bolts which hold the axle
caps.
5.
Jack the fron
und.
6.
Take the bolts out of the caliper.
7.
Remove the axle caps.
8.
Remove the wheel bolts.
9.
Reassemble in reverse order.
10.
Make sure all bolts are properly tightened.
TORQUE SPECIFICATIONS:
Axle Cap Bolts: 55 lbs/ft. Final Torque.
In Three Steps:
1st - 25 lbs/ft.
2nd - 45 lbs/ft.
Final - 55 lbs/ft.
Wheel Bolts:
70-80 lbs/ft.
1.
Park on a level surface and set the parking brake mly.
2.
Position the gear
selector i
n PARK position.
3.
Place the jack close to rear wheel where indicated on the frame.
4.
Raise rear wheel.
5.
Remove the four wheel bolts.
6.
Reassemble in the reverse order of the above.
7.
Tighten all wheel bolts. Torque them
to
70-80 lbs/ft.
Contact Westward Industries for Manuals and Documentation. Do not copy.
It is imperative to torque each side evenly beginning at 25 lbs/ft
Rear Tire
