Westward 5ZL14G, Инструкция по эксплуатации и каталог запасных частей

Страница: 1 / 16

Operating Instructions and Parts Manual 5ZL14G
Please read and save these instructions. Read through this owner’s manual carefully before using product. Protect
yourself and others by observing all safety information, warnings, and cautions. Failure to comply with instructions could
result in personal injury and/or damage to product or property. Please retain instructions for future reference.
Form 5S6870 Printed in Taiwan STC100
Angle Die Grinder
Description
Air powered die grinders are designed for grinding, polishing, and smoothing sharp edges. This tool may be used with
carbide burrs. Different collets are available which serve as adapters for virtually all standard grinding accessories. In
addition, this tool may also be used for gasket removal and weld grinding angled heads allow access to tight or
difficult to reach areas. Front exhaust models direct air away from user’s face, Angled head allows access to tight or
difficult to reach areas.
Unpacking
When unpacking this product,
carefully inspect for any damage
that may have occurred during transit.
This product is part of a high
pressure system and the following
safety precautions must be followed
at all times along with any
other existing safety rules.
1. Read all manuals included with
this product carefully.
Be thoroughly familiar with the
controls and
the proper use of the equipment.
2. Only persons well acquainted with
these rules of safe operation
should be allowed to use the air tool.
Specifications
Speed Motor Horsepower Air Inlet NPT Required Pressure Weight
Model (RPM) HP (in.) (psi) (Lbs)
5ZL14G 18,000 1/4 1/4 90 1.1
Air Input Diagrams
04634 06/11
Version 0 #850