Westward Operating Instructions and Parts Manual
32H888-32H890, 32H894-32H896
4
TROLLEY
Replace the lock parts
To release lock set:
1. Remove the spring clip
①
using hand tool like pinchers.
2. Pull out the whole central lock including bolt
②
,
lock
③,
central
locking bar
④.
3. Separate the central locking bar
④
from lock
③
,back hole
⑤.
To reinstall lock set:
1. Insert central locking bar
④
into back hole
⑤.
2. Assemble lock
③,
central locking bar
④,
bolt
②
in sequence.
3. Insert spring clip
①
on the lock.
4.Tighten the bolt
②.
Assemble casters
After unpacking unit, The cabinet need to be placed upside down to
install the casters. Place the swivel casters with brake on the same
side as the handle, place fixed casters across the other side as without
the side handle. Assemble casters as figure shown.
1. Place the cabinet wheels up on a flat surface.
Protect the paint by placing the packaging down first.
2. Insert the bolts through the spring washers, then attach the casters to
the mounting plate. Mount both swivel casters on the same side of
cabinet as the side handle.
3. Tighten all bolts using a wrench.
Fixed
caster
Swivel caster
with brake
Fixed
Caster
Hexagon bolt
M8x20 mm
Washer
