Do not use the heater in bathrooms, laundry rooms, or similar indoor locations.
Turn off heater before unplugging.
Do not insert any foreign object or allow foreign object to enter the ventilation opening or
exhaust opening as this may cause electric shock, fire, and/or injury.
Never block the air intake or exhaust opening in any manner as this could lead to fire.
Do not locate heater, when in use, immediately below a receptacle.
Never operate heater in or around a bathtub, shower, or swimming pool.
Only open heater if instructed by an authorized representative of the manufacturer. There are
limited user-serviceable parts inside.
Use heater only as described in this manual. Any other use is not recommended by the
manufacturer as it may lead to fire, electric shock, and/or series physical injury or death.
Heater Specifications
Heater
Model# WI-0035
Carton Size: 18.5 in x 17.1 in x 18.6 in Thermostat: Electronic Analog
Heater Size: 16.5 in L x 16.5 in W x 15 in H Fan System: Cross Flow Fan
Net Weight: 32 lbs
Fan Noise Level: 46 db
Gross Weight: 36 lbs
BTU: 5600
Cabinet: ¾ ply – Oak
Delayed Start Function
Power Cord: 5.8 ft / 16 gauge
Remote Control
Heat Chamber with Diathermanous Copper Plate
“HI” Function: 1500 watts
Heating Elements: 4 Infrared Quartz Bulbs “LOW” Function: 750 watts
Power Requirement: 120V 15 amp
Electrostatic Washable Filter
Heating Elements Life Expectancy Potential: Rated 20,000 hrs
Warranty: Limited 3-Year Parts Only
Heat Type: Therapeutic Quartz Infrared Heat
How It Works
The Infrared Heater works with your in-home furnace to provide supplement heat. In short, room
temperature air circulates from the rear of the Infrared Heater, passes through a highly efficient filter,
enters a chamber that houses the Infrared Quartz Bulbs, and exits as heated air from the Diathermanous
Copper Plate constructed on the front of the unit. The Infrared Heater ideally heats a room of 500 to 700
square feet, but can be used to heat up a single room size up to 1000 square meters, depending on the
ambient temperature. And it does all this with a noise level below 46db. The Infrared Heater is not for
use as the primary/sole heating system.
Components and Functions
A. The Infrared Heater is constructed with Infrared Quartz Bulbs. Each Infrared Quartz Bulb is rated
at 375W. These bulbs produce therapeutic infrared rays that warm the air which passes through
the inner chamber. The Infrared Quartz Bulbs are constructed with a stainless steel thermal
conducting housing. The incorporated twisted style increases the efficiency of the unit.
3
