Westpac Presto Smart VX690, Руководство пользователя

Страница: 27 / 29

53 52
10.2 Hardware Faults.
Hardware Faults Action
Terminal does
not start
Ensure that the battery charge state is not below the critically
low level� The terminal will not work if there is insufficient
charge remaining in the battery�
Connect terminal to a power source for at least 15 minutes
if terminal is below operational battery charge state�
Ensure that you press the key for approximately
10 seconds, until the terminal back-light turns on�
No response
from the
terminal
Ensure that the power cable is securely connected to the base
and the terminal is charging�
Power off the terminal for 10 seconds� Power on the terminal�
Retry the transaction�
Call Merchant Helpdesk if the problem persists�
Terminal not
reading cards
Re-insert/swipe the card as per instructions in Section 3�
If there is still no response from the card reader power off the
terminal for 10 seconds�
Power on the terminal� Attempt transaction again�
Call Merchant Helpdesk if the problem persists�
This page has been left blank intentionally�