Westlab 665-084, Руководство по эксплуатации продукта

Страница: 8 / 10

8
PRODUCT MANUAL
1800 358 101
sales.au@westlab.com
www.westlab.com.au
+64 9 553 3677
sales.nz@westlab.com
www.westlab.co.nz
646 568 5391
sales.us@westlab.com
www.westlab.com
1 877 822 1455
sales.ca@westlab.com
www.westlab.com
Australia New Zealand United States Canada
Energy saving mode
1. Press the ‘ON/OFF’ button before entering the weight mode.
2. Double press the ‘TARE’ button and then press the ‘UNIT/COU’ button to enter the
setting mode. It will display as ’01-diu.’
3. Press the ‘TARE’ button until it shows ’07-LED.’
4. Press the ‘CAL’ button to enter the setting for backlight saving mode.
5. Press the ‘UNIT/COU’ button to choose one of the below modes:
•
0: Display backlight is OFF
•
1: Display backlight ON
•
2: Display backlight will turn OFF after 15 seconds of inactivity
6. Press the ‘CAL’ button to confirm the selected setting.
7. Turn OFF the balance to activate the new mode.
Baudrate setting
1. Press the ‘ON/OFF’ button before entering the weight mode.
2. Double press the ‘TARE’ button and then press the ‘UNIT/COU’ button to enter the
setting mode. It will display as ’01-diu.’
3. Press the ‘TARE’ button until it shows ’08-BUD.’
4. Press the ‘CAL’ button to enter the Baudrate setting mode.
5. Press the ‘TARE’ button to choose the required Baudrate.
6. Press the ‘CAL’ button to confirm the selected setting.
Data output setting
1. Press the ‘ON/OFF’ button before entering the weight mode.
2. Double press the ‘TARE’ button and then press the ‘UNIT/COU’ button to enter the
setting mode. It will display as ’01-diu.’
3. Press the ‘TARE’ button until it shows ’09-odE.’
4. Press the ‘CAL’ button to enter the data output setting mode.
5. Press the ‘TARE’ button to choose one of the below modes:
•
0: No output
•
1: Press key to output [press ‘CAL’ as print]
•
2: Timing output
•
3: Continuous output
6. Press the ‘CAL’ button to confirm the selected setting.
7. Turn OFF the balance to activate the new mode.