Westlab 664-315 Скачать руководство пользователя страница 4

4

PRODUCT MANUAL

1800 358 101

[email protected]

www.westlab.com.au

+64 9 553 3677

[email protected]

www.westlab.co.nz

646 568 5391

[email protected]

www.westlab.com

1 877 822 1455

[email protected]

www.westlab.com

Australia

New Zealand

United States

Canada

4. Maintenance & Cleaning

• 

If repairs are performed by unauthorised personnel, the product warranty may 

become void.

• 

Use only cold drinking water up to maximum of 30°C.

• 

The deionised water that is produced is not suitable for human consumption.

• 

Only use the original raw water hose, as the flow restrictor integrated in it prevents 

damage to the cartridge.

• 

Never insert a shut-off device in the cartridge outlet nor kink the outlet hose, as the 

plastic cartridge could burst under the resulting pressure build up. Always ensure 

free water flow. 

• 

The use of this system in any other way than that described in these operating 

instructions invalidates the guarantee.

• 

An earthing contact socket outlet is required for the elec¬trical connection.

• 

Under some circumstances, improper handling could result in the leakage of ion 

exchange resin from an ion exchange cartridge. CAUTION: Danger of slipping on 

leaked resin!

• 

Proceed as follows: As the resin material can cause slight irritation on contact with 

skin and/or eyes, immediately turn off the raw water tap to stop further leakage. 

On skin contact, immediately wash contacted skin areas with plenty of water. On 

contact with eyes, remove contact lenses if his is possible without difficulty, then 

immediately and carefully wash eyes with plenty of water for about 10 minutes. 

When irritation still occurs, seek medical advice immediately. 

• 

Wear protective gloves to collect up the leaked resin, fill it into a clearly labelled plastic 

container and return it to the manufacturer or the authorised specialist supplier.

5. Installation & Operation

1.  Open the packaging and gently remove the demineraliser from the box.
2.  Place the unit gently onto a firm and levelled surface.
3.  Unpack every individual component.

ATTENTION:

 The manual should be kept with the device and all the packaging should 

be kept in safe storage for at least two years for warranty purposes.

Do not place the demineraliser in an area that makes it difficult to operate the unit.

Содержание 664-315









Отзывы: