Westlab 300 - 4200RPM, Руководство по эксплуатации продукта

Страница: 8 / 14

•
8
PRODUCT MANUAL
1800 358 101
sales.au@westlab.com
www.westlab.com.au
+64 9 553 3677
sales.nz@westlab.com
www.westlab.co.nz
646 568 5391
sales.us@westlab.com
www.westlab.com
1 877 822 1455
sales.ca@westlab.com
www.westlab.com
Australia New Zealand United States Canada
1. Attach the universal attachment.
2. Place the flask on the universal attachment.
3. Tighten the flask with the flexible rubber attachment.
4. Lock the flask to the universal attachment by stretching the rubber attachment to suit.
First place the flask on the universal attachment. Then tighten and lock the flexible rubber
flask attachment to the universal attachment. Ensure that the flask attachment is secure
on the universal platform. Then attach the universal attachment to the vortex mixer.
Recommended speed values
Attachments Image Maximum Fill
Maximum
Recommended Speed
24 Microtube
Foam Attachment
75% 700 RPM
Microplate Foam
Attachment
75% 700 RPM
Flask Rubber
Attachment
250ml 400RPM
Connecting the power adaptor
Before connecting the ends, ensure that the vortex mixer is in Stand-By mode and that
the cup attachment is secure in the modified shaft body.
Connect one side of the power adaptor pin to the rear side of the unit and the other end
to the main supply as pictured. Ensure that the main switch is not switched ON until
the adaptor is connected at both ends.