Westinghouse WVE915SC, Руководство пользователя

Страница: 12 / 40

12
INSTALLING YOUR OVEN ACCESSORIES
INSTALLING YOUR OVEN ACCESSORIES
Slides (telescopic runners) (on selected models)
1. The selected models are supplied with a set of slides
and instructions on how to assemble. Ensure the
rack and slides are of the same hand, eg. left hand
slide should be fitted on the left hand rack.
2. The instructions also show recommended slide
positions on the rack.
Installing the slides (telescopic runners)
1. Obtain left hand side rack and left hand slide –
see image to identify
2. The shaded wires indicate the wire the slide can be
mounted on. Fit slide rear clips to the rear of wire at
an angle as shown below.
3. Push slide front clip over wire until secured.
CLICK!
Installing the side racks
1. Insert the rear peg into the rear access hole
provided, ensuring peg is fully inserted.
2. Then locate the front peg into the front access
hole and push in firmly.
Fitting the shelves between the side rack wires
The shelves are designed so that they have maximum
extension but cannot be accidentally pulled right out.
To fit a shelf to side racks:
1. Locate the rear edge of the shelf in between guide
rails of the side rack – see diagram.
2. Ensure the same rail positions on both sides of the
oven are being engaged. With the front edge raised,
begin to slide the shelf into the oven.
3. Once the detents have passed the front edge of the
side rack, the shelf can be pushed completely in.
When fully inserted the shelf should not interfere
with the closed oven door.
L = Left hand side
R = Right hand side
1
2
3