WARNING: The red Safety Light will serve as a visual alarm to alert you that
the thermal cut-off is broken. At this time, the Heater will turn itself OFF.
If both the red and the amber Lights are illuminated, immediately turn the
Heater/Fan Dial to the OFF position, turn the Thermostat Dial to MIN and
unplug the cord from the electrical outlet.
(See Auto Safety Shut Off
section of this manual for more information.)
Setting the Thermostat for Breeze Fan Only
1. You may use your Heater Fan to create a comfortable breeze by
circulating air only. When using the Fan, first turn the Thermostat Dial
to the MAX position.
2. Next, turn the Heater Dial to Fan.
3. The amber Power ON/OFF Light will illuminate when you turn the
Heater Dial from the OFF position. The Fan will begin to rotate.
Your Heater will quietly and efficiently provide a cool and comfortable
breeze to your area.
4. When the desired temperature is reached, turn the Thermostat Dial
counter-clockwise to a lower setting until the Fan turns itself OFF.
5. The temperature is now pre-set.
6. When you are finished using the Flat Fan Heater, turn the Heater Dial to
the OFF position, turn the Thermostat Dial to the minimum setting,
and unplug from the electrical outlet.
NOTE: The Heater will cycle ON and OFF to maintain this temperature.
This is normal.
NOTE: To prevent the Heater from cycling, turn the Thermostat Dial to a
lower setting.
6
BEFORE USING FOR THE FIRST TIME
Your WST6003 Flat Fan Heater is designed for space heating or as a
supplementary heat source. It is not intended to be the main source of heat.
NOTE: Make sure the Heater Dial is in the OFF position before operating.
1. Place your Heater on a level, stable surface. It is recommended that the
Heater be placed on the floor, where it can keep the lower level of the
room warm. Be sure the sides and back of the Heater are at least 3 feet
away from any combustible materials.
DO NOT COVER the Air Intake or
the Front Safety Grill.
2. Plug the Flat Fan Heater into a 120V AC electrical outlet.
3. There are 3 settings on the Heater Dial:
Fan / Breeze Fan only LO Heat / 750 Watts HI Heat / 1500 watts
OPERATING INSTRUCTIONS
Setting the Thermostat for Heat
1. When heating a cold area in the room, first turn the Thermostat Dial to
the MAX position.
2. Next, turn the Heater Dial to either LO or HI Heat.
3. The amber Power ON/OFF Light will illuminate when you turn the
Heater Dial from the OFF position. The Fan will begin to rotate.
Your Heater will quietly and efficiently heat your area.
4. When the desired temperature is reached, turn the Thermostat Dial
counter-clockwise to a lower setting until the Fan turns itself OFF.
5. The temperature is now pre-set.
6. When you are finished using the Flat Fan Heater, turn the Heater/Fan
Dial to the OFF position, turn the Thermostat Dial to the minimum
setting, and unplug from the electrical outlet.
NOTE: The Heater will cycle ON and OFF to maintain this temperature.
This is normal.
NOTE: To prevent the Heater from cycling, turn the Thermostat Dial to a
lower setting.
5
