8
EN
CLEANING INSTRUCTIONS
WARNING:
To avoid the risk of electrical shock, always make
sure the product is unplugged from the electrical outlet before
disassembling, cleaning, servicing or relocating.
1. The product should be cleaned and checked on a regular basis.
Make sure the fan blade is clean at all times to prevent the fan
blade from damage and fading.
The fan can be cleaned in two ways:
a) Vacuum the fan blades or use a can of compressed air, or
b) Remove the front guard by removing the 3 screws securing
the grille to the fan (be sure to use a screwdriver with a
magnetic tip).
2. To clean the front guard, turn counterclockwise to loosen the
screw and pull off the guard. To place back on, match the shape
of the shaft to the inside groove of the guard and push inwards.
Screw the fastener on clockwise to tighten.
3. Take the guard off and wipe it with a cloth or use a can of
compressed air. Make sure the front guard is completely dry
before securing it back onto the fan.
4. Wipe the fan blades (do not remove) with a damp cloth dipped
in a light solution of water and mild detergent.
5. Make sure that water does not get into the motor while
cleaning.
6. The blade and rear guard (not removable) must be completely
dry when re-securing the guard in place.
7. Do not use any chemical cleaners such as acid or alcohol to
clean the fan.
CARE AND MAINTENANCE
WARNING:
Do not attempt to open any part of the motor housing,
as this may cause an electrical shock. This product has been
permanently lubricated at the factory and will not require further
lubrication for the entire product lifespan. Additional lubrication of
electric motor parts could create a fire hazard.
1. The product must be placed in its original packaging and
stored in a room with low humidity.
2. Make sure the product is completely dry before use.
NOTE: If you experience a problem, please return the fan to the
retailer. Do not attempt to open the motor housing yourself, as
doing so may cause damage to the fan or personal injury.
WSFS1808BK_18 Oribit Oscillating Fan_2L.indd 8
5/12/2019 18:27:17