Westinghouse WSF6725I, Руководство пользователя

Страница: 9 / 24

SETTINGS
Starting the machine
1� Press on/off switch� 1
2� Select the appropriate program for your dishes using
the program button�
5
3� If you prefer, you can select additional functions�
4 6 7 9
4� Start the program by pressing the start/standby
button� 3
Program follow-up
You can follow the progress by the help of the program
follow-up symbols on the display�
15
As the washing proceeds, respective washing and rinsing
symbols will be illuminated�
When the drying symbol is on, the machine remains silent
for about 45–50 minutes�
Do not open the door before the end indicator is
illuminated� When the program finishes, end indicator is
illuminated�
When the program you have selected starts, you may see
the estimated remaining time in the time indicator display�
NOTE: The total time that programs take can differ
according to ambient temperature, the temperature of
the mains water and the amount of dishes; therefore the
program may take a different amount of time than that
initially stated.
Program follow-up
Once the selected program starts, should you wish to
change to a different program;
• Press on start/standby button�
3
• Select the new program using program button�
5
• The newly selected program continues from where
the previous one was left�
• Start the program by pressing the start/standby
button again�
3
Cancelling program
If you want to cancel the program once it has started;
• Hold the start/standby button for 3 seconds�
3
• The display will count down from 3 to 1 and when
the countdown is over, the remaining time will be
displayed as 1 minute�
The machine will empty all the water in this 1 minute; the
time is reset and completion symbol is illuminated�
Switching off the dishwasher
• When the end indicator is illuminated, switch off your
machine by pressing the on/off button�
• Later, unplug your machine and turn off its faucet�
NOTE: To improve drying results with the most efficient
use of energy, open the door approximately 10cm
when the program is finished and the end indicator is
illuminated. Leave door ajar and allow the dishes to cool
for 30–40mins.
If the machine door is opened or a power failure occurs
during washing, the machine will resume the cycle where
it stopped when the door is closed or power is restored.
9
SETTINGS