CONTROL PANEL
7
CONTROL PANEL
Changing a Program
Follow the steps below to change a program
while in operation.
Switch the machine on by pressing the
On/Off button. The On/Off lamp remains
lit as long as the machine is on.
Press the Start/Pause button to start the
selected program. The Start/Pause light
will switch off and the Wash light will
illuminate. If the door of your machine is
opened while a program is in operation,
the Start/Pause light will flash.
NOTE:
Press the half load button to
activate the Half Load function, which
shortens the duration of a program. Press
the button again to cancel it.
NOTE:
If an extra feature is used,
such as the Delay, Tablet or Half Load, on
the most recent wash program, this
feature will remain active on the next
selected program. To cancel
this feature on the newly selected wash
program, turn the machine off and on.
Extra features can be activated with the
newly selected program.
Delaying the Program
Press the Delay button to delay the start
time of a program for 3, 6 or 9 hours.
Pressing the button once will delay the
start time for 3 hours, pressing twice will
delay for 6 hours, and pressing a third
time will delay the start time for 9 hours. If
the button is pressed for a fourth time,
there will be no delay. Press the Start/
Pause button to activate the delay. The
program can be selected first and the
delay time after, or vice versa. To cancel or
change the delay time, press the Start/
Pause button first, then select a new delay
time. The delay time can be cancelled by
turning off the machine. During a delay,
the light corresponding to the remaining
time is switched on.
9h
3h 6h
Press the Start/
Pause button.
9h
3h 6h
After the program stops, select a
new program using the program
Selection Up/Down
buttons.
9h
3h 6h
Press the Start/Pause
button to start the newly
selected program.
The new program will
resume the course of the
old program.