PREPARING FOR USE
PREPARING FOR USE
W
ARNING
CAUTION
Solubility of the tablet detergents produced by different
companies can vary depending on the temperature
and time Therefore, it is not recommended to use such
detergents in short programs It is more suitable to use
powder detergents in such programs
Should any problem, which you have not encountered
before, arise with the use of this type of detergents,
contact the detergent manufacturers directly
When you give up using combined detergents
•
Fill the rinse aid compartment
•
Set the suitable rinse aid setting
Filling with rinse aid and making the setting
To fill the rinse aid compartment, open the rinse-aid
compartment cap
Fill the compartment with rinse aid until MAX level
and then close the cap
Be careful not to overfill the rinse aid compartment
and wipe up any spills
In order to set rinse aid level, follow below steps:
ARNING
CAUTION
Use only those rinse aid materials which are allowed for
use in the machine As rinse aid residues left as a result of
overflowing will create extremely high amounts of foam
and thus reduce the washing performance, remove the
excess amount of rinse aid by wiping it with a paper towel
or cloth
RINSE-
AID
1
5
•
Turn on the machine by pressing the
On/Off button.
•
Press the Up button for at least
5 seconds immediately after the
machine is turned on.
•
Release the Up button when all leds
blinks twice. The last setting level is
displayed.
•
Press Up or Down button to increase
or decrease the hardness level.
•
Turn off the machine to save the
setting.
The factory setting is “4”.
If the dishes are not drying properly or
are spotted, increase the level. If blue
stains form on your dishes, decrease the
level.
Level
Brightener Dose
Indicator
1
Rinse-aid not
dispensed
Wash LED is on.
2
1 dose is
dispensed
Dry LED is on.
3
2 doses are
dispensed
End LED is on.
4
3 doses are
dispensed
Wash and Dry
LEDs are on.
5
4 doses are
dispensed
Wash and End
LEDs are on.