Westinghouse WRR926SB, Руководство пользователя, Страница: 5 / 8

5
INSTALLATION
Fixing the rangehood
Use screw and washer to fasten the rangehood to the
wood support from upper side.
Ø 6mm washer
M6 x 40
screws
Fixing the rear cover
Use screw to fix the rear cover.
ST 3×12 self tapping screws
Installing the air intake grill
Carbon filters aren’t required for standard ducted
installation. Remove and replace with air intake grills
provided.
air intake grill
Fixing the flue pipe
Fix a Ø 150mm, non-combustible, rigid flue pipe to the
exhaust transition duct using cable ties or duct tape.
Fixing a Ø 125mm flue pipe
Fix the Ø 150mm to Ø 120mm converter to the rangehood
first, then fix a Ø 125mm noncombustible flue pipe to the
exhaust transition duct using cable ties or duct tape.
IMPORTANT!
If using a flexible duct, always install duct with the
wire helix pulled taut to minimise pressure and noise.
Ducting accessories - WRR626SB WRR926SB
For best performance Ø 150mm ducting is recommended
(Ø 125mm ducting can be used, but will reduce the
airflow of the cooker hood).
roof cowl
AR150RC
(AR125RC)
AR150F
(AR125F)
AR150FD
(AR125FD)
AR125FJD
with damper
wall vent kit
AR150WV
(AR125WV)
bend AR150FD
(AR125B) for
Ø 150 bend use
02825263
Accessories can be bought from your local appliance
retailer, or in Australia at our online spare parts and
accessories store: shop.electrolux.com.au
Ducted recirculating installation
If ducted recirculating installation is used, carbon filters
are recommended. The carbon filters are already
installed in the rangehood on delivery.
AR150WV
(AR125WV)
Carbon filters diminish cooking odours in the recirculated
air. Depending on the frequency of use and the type
of cooking, the expected life of carbon filters is 1-6
months. Using carbon filters with reduce the airflow of
the rangehood.