INSTALLATION
8.
Electrical connection
Check that the installation complies with the standards
of local building, gas and electrical authorities. Before
connecting to the mains supply ensure that the mains
voltage corresponds to the voltage on the rating plate
inside the rangehood.
9. Fix telescopic flue cover to the wall mounting bracket
with screws supplied. Ensure that the upper section
is extended.
Fig. 15
Fig. 16
If installed in recirculating mode, insert the optional carbon
filter (included in recirculation kit AR910RK).
To complete the rangehood installation, insert the filters to
the underside of the hood body. Place back edge of filter
into position and push up front edge so that the filter clips
into place.
Your Westinghouse rangehood is now ready to use.
Care must be taken to ensure the screws are not cross
threaded when attaching the upper flue cover.
CAUTION
10. (Only for model WRCG933S and WRFG943S)
Insert the glass into the slot on the main body as show
in Fig.17, then pull the latchs to inner side, same time
push the glass in place (Fig.18).
* Please remove the grease filter before installing the glass.
* We recommend that two people carry out this installation
step.
Side view
Fig. 17
Fig. 18
10
