Westinghouse WHE6200S, Руководство пользователя

Страница: 10 / 20

Drinks chill
The drinks chill timer is used to quickly chill a bottle.
When you touch the “Drinks Chill” button, the default time
of 20 minutes will be displayed. You can adjust the time
by touching the button “+” or “-” (with 5 minutes plus or
minus for each touch). When the drinks chilling time is up,
alert will be issued, which will not stop until you open the
door.
You can change the time or turn the timer off even after
the countdown has started.
If your drink is not cold enough, reset the drinks chill
function (remembering the drink is already partially
chilled).
Suggested chilling times:
• 10 minutes for cans of drink
• 20 minutes for bottles of wine
• 30 minutes for bottles of soft drink.
NOTE: After the ‘Drinks Chill’ mode is activated, if
you press the ‘Zone’ button, the preset temperature
will display for the corresponding compartment, the
temperature setting can be adjusted by pressing the
button ‘+’ or ‘’-’, or If within 5 seconds no button is
pressed the display will return to the previous setting.
Combination buttons
• Demo Mode
The system can enter into the Demo Mode if the
combination buttons of “h shopping” are pressed
for 3 seconds (when you can hear the prompt beep)
within 10 minutes of the system getting booted, with
“dE” displayed for 2 seconds. Once enabled, the Demo
Mode will not exit unless the refrigerator power supply
gets disconnected. This mode is used for showroom
demonstration of the user display and LED lighting, with
no refrigeration active.
NOTE: Display malfunctions may be due to brief power
supply interruptions. If this occurs, turn the refrigerator
off at the power point and wait 5 minutes. The refrigerator
pressure will need time to equalise before you turn the
refrigerant on again.
ELECTRONIC DISPLAY CONTROLS (CONTINUED)
Door alarm
If the freezer door or fresh food door is left open for
longer than 2 minutes, a buzzer will sound until any
button on the panel is pressed. If 8 minutes after any
button is pressed and the door is still left open, the buzzer
will sound again. If no button is pressed to terminate the
buzzer, the buzz will last for 1 hour, and after 1 hour the
buzz will stop with the following error codes displayed:
• R1 (fresh food door 1 open)
• R2 (fresh food door 2 open)
• F1 (freezer door 1 open)
• F2 (freezer door 2 open)
The error code will disappear on display after the
corresponding door is closed.
10
ELECTRONIC CONTROLS