Westinghouse WFTR40W, Руководство пользователя

Страница: 7 / 12

Page 7
SET UP & USE
REMOTE CONTROL BATTERY INSTALLATION
1. Press down on the battery compartment cover and slide
it out.
2. Insert 2 “AAA” batteries (not included) making sure that
the positive terminals are facing the proper way.
3. Replace the cover.
NOTE:
Use size “AAA” alkaline batteries. Do not use
rechargeable batteries.
OPERATING INSTRUCTIONS
CONTROL PANEL/REMOTE CONTROL KEYS
1. -ON/OFF KEY
The key is for switching on the fan. The fan will start at low
speed. Press this key again to turn fan off.
2. -AUTO SHUTOFF TIMER KEY
Choose from 1 to 8 hours. Press once for 1 hour auto shutoff and
press to increase or to decrease the auto shutoff time in
one-hour increments..
3. -OSCILLATION KEY
Press this key to oscillate the fan. To stop oscillation, press the
same key again. NOTE: Do not rotate fan head manually as it
could damage the osciallation function.
4.-FAN SPEED CONTROLS
- with fan ON, press to increase fan speed.
- with fan ON, press to decrease the speed
REMOTE CONTROL OPERATION
1. Point the remote controller at the receiver and press the desired button.
2. The remote control will work at distances of up to roughly 16’ (5 m) and at an angle
of 30 degrees right and left from the control panel.
3. Avoid direct sunlight as it may effect the performance of the remote control.
Remote Control
Battery
Battery Cover
Fig. 1
Pedestal Assembly
Fig. 5
Fig. 7
Fig. 6
Fig. 4
A
B
Extrusions
Fig. 2
Base Assembly
Fig. 3
Positioning
Hole
Positioning
Pole