background image

Set the time

You must set the time before you can operate the appliance.
1.  After the appliance has been electrically connected, 

  

the clock icon will be displayed. Along with the 

clock icon, the “12” will be flashing.

2.  Toggle the temperature selector   or  , then touch 

 when you have the right hour.

3.  The minutes will flash and can be set in the same 

manner. 5 seconds after the last change, the clock 

display will stop flashing, confirming that the time has 

been set.

Note: The clock has a 24 hour display.

Condition the oven

 

(to burn off any residue)

New appliances can have oil or residue left from 

manufacturing. You will need to heat your oven for  

2 hours before using it for the first time.
1.  Turn the oven selector dial to “Fan Bake”.
2. Using the temperature control knob, set the oven at 

180°C for approximately 2 hours. Please ensure that 
the room is well ventilated during this process.

Installing the accessories

1.   Install the telescopic slides (where supplied) 

to the side racks. Refer to the installation 

guide supplied with the telescopic slides. 

2.   Insert side racks.

There is a left hand and right hand version (see image).
1.  Insert the rear peg into the rear access hole, 

ensuring that the peg is fully inserted.

2.  Then locate the front peg into the front access 

hole and push in firmly.

Set...

 
 
 

Left hand side rack

Rear peg

Front peg

4.   Fit shelf/tray (where  

supplied) to telescopic slides

1.  Push the shelf or tray along the 

top of the slide until it hits the 

back post.

Shelf

Back post

2.  Drop the front of the shelf or tray 

onto the slide ensuring it sits behind 

the front post of the slide.

Shelf

Front post

3.  When fully inserted the shelf/tray 

should not interfere with the closed 

oven door.

3. To fit a shelf or tray to side racks:

1.  Locate the rear edge of the shelf 

in between guide rails of the side 

rack. Ensure the same rail positions 

on both sides of the oven are being 

engaged. 

2.  With the front edge raised, slide the 

shelf into the oven.

3.  Once the detents have passed the 

front edge of the side rack, the shelf 

can be pushed completely in.

Detent

Bake/

Pizza

EasyBake

+Steam

Steam Assist

Clean

Отзывы: