Westinghouse WFE912SA Скачать руководство пользователя

Страница: 47 / 52

LPG

CONVERSION

LPG CONVERSION CHANT
MODELS WFE912, WFE914 & WFE916

This appliance is supplied set up for Natural Gas usage.

A conversion kit is included with the product for Universal

LPG usage. The conversion kit contains 6 injectors and 1

LPG sticker.
Please follow the procedure below if a conversion to suit

UNIVERSAL LPG is required:
1. Remove the hotplate trivets, burner caps and burner

crowns to access the hotplate injectors. Replace the

factory fitted injectors with the appropriate injectors, as

supplied. Refer to injector orifice table for injector sizes.

The injector size is stamped on the side of the injector.

2. Unscrew the top hat nut from the regulator. The top hat

nut and control pressure spring assembly will disengage

as an assembly.

3. Unscrew the threaded pin from top hat.
4. Upturn threaded pin, so spring is free and screw pin

back into the top hat until firm.

5. Refit the top hat nut assembly to the regulator ensuring

that it is fully screwed down. The regulator is now set

for connection to LPG.

6. Turn on the gas supply and at each new connection

check for leaks using soapy water. Each hotplate

valve should be turned on, one at a time, and the

injector hole blanked off for several seconds.

7. The operation of the regulator can be confirmed by

connecting a manometer to the pressure test point

located on the side of the regulator body adjacent to

the outlet.

With the appliance operating check the outlet pressure

• when all burners of the appliance are operating

at maximum,

• when the smallest burner of the appliance is

operating at minimum.

Under these conditions the outlet pressure should not

vary from the nominal outlet pressure of 2.60kPa by

more than ±0.52kPa.

8. If the regulator appears to not be performing

satisfactorily then check the following points:

• If the outlet pressure is consistently too low then

the inlet pressure may be too low and adjustment

of an upstream regulator may be needed, or an

upstream regulator or valve with insufficient flow

capacity may be present in the gas supply line.

If this is suspected then it may be necessary to

repeat the checks whilst measuring both the inlet

and outlet pressure to determine if the inlet pressure

is in the range 2.75 – 7.00kPa.

• Check that the insert has been fitted correctly.

• Check that the turret screw is fully screwed down.

• Check that the regulator has been fitted to the gas

supply line in the correct orientation, the arrow on the

base of the body indicates the direction of gas flow.

Once these checks have been completed, if the regulator still

fails to perform in a satisfactory manner it should be replaced.

9. One by one, turn the knobs to minimum and screw

in the bypass screw (accessible when the knob is

removed) until a small stable flame results. Turn the

knob to maximum and then back to minimum to ensure

that the correct minimum flame is maintained.

10. Attach the LPG sticker to the cooker, near the gas

supply inlet. Cover the Natural Gas label that is

factory fitted.

Flame size adjusted

to maximum

Flame size adjusted

to minimum

Bypass screw

Control knob shaft

Reposition

Top hat nut assembly,

fully screwed down

Turn top hat

nut anti-

clockwise

and remove

Configuration for

Natural Gas

Configuration for LPG

Содержание WFE912SA





















































Результаты поиска

Содержание WFE912SA

Отзывы:

Похожие инструкции для WFE912SA

Бренды по названию

Популярные бренды

Westinghouse WFE912SA, Руководство пользователя

Результаты поиска

Содержание WFE912SA

Отзывы:

Похожие инструкции для WFE912SA

Бренды по названию

Популярные бренды