26
En
Panel Size
39.5inch diagonally
Display Type
DLED
Panel Technology
TFT
Panel 60 Hz Vs. 120 Hz
60 Hz
Display Resolution
1080P
HDMI Support
Up to 1080P
Panel Resolution
1920 x 1080
Aspect Ratio
16:9
Dynamic Contrast Ratio-Panel
1000:1
Response Time (G To G)
8 ms
Lamp Life (Typ. Hours)
30,000 hours
Horizontal Viewing Angle (At CR>10)
178
Vertical Viewing Angle (At CR>10)
178
Wall-mount(LxW-mm)
200*200 VESA(mm)
IC Statement
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is
subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any
interference, including interference that may ca
Caution:
15.19
This device complies with Part 15 of the FCC rules and Industry Canada license-exempt RSS standard(s). Operation is subject to
the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
15.21
The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications or change to this
equipment. Such modifications or change could void the user’s authority to operate the equipment. This radio transmitter
(identify the device by certification number or model number if Category II) has been approved by Industry Canada to operate with
the antenna types listed below with the maximum permissible gain indicated. Antenna types not included in this list, having a gain
greater than the maximum gain indicated for that type, are strictly prohibited for use with this device.
15.105
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement.
To maintain compliance with FCC’s RF exposure guidelines, this equipment should be installed and operated with a minimum distance
of 20cm between the radiator and your body.
use undesired operationof the device."
This equipment should be installed and operated with a minumum distance of 20 cm between
the radiator and your body.
CAN ICES-3(B).
Canadian DOC Statement
Standard Television Receiving Apparatus Canade BETS-7
This Class B dighital apparatus complies with Canadian ICES-003.
SPECIFICATION
