4-24
S
ECTION
4: M
ASTER
F
ILE
E
NTRY
SE 8
XX
-S
ERIES
D
EVICE
C
ONFIGURATION
E
NTRY
[d808entr]
The [d808entr] screen must be completed for all 8
xx
-series ACUs (use F2 to display the screen
after the previous screen has been stored). A sample screen follows:
Level, Name, Password
. Required. These first three fields are entered to identify up to eight
operators who will be permitted to set/change system parameters for a particular ACU from
the ACU terminal port. User 1 must be established (defaults to operator 1); operators 2
through 7 are optional. Enter the operator's security code (A through F), name and password.
The security codes A through F control the degree to which the operator may add/change/
delete the system parameters from the ACU terminal port. Code A has the most privileges,
code F has the least. For detailed information concerning operator privilege levels, refer to
the applicable ACU manual.
N
OTE
The
Level
,
Name
and
Password
fields are specific to individual 804/808 ACUs and apply only
to operators logging in directly via the ACU's terminal port. The fields are not part of the SE
6000 control parameters.
Tamper
. Optional. Enter the tamper report number if a report has been created (see
applicable ACU manual). The report states the system actions that will be taken if the ACU
enclosure housing is opened. Default is 0.
2
11
1
:=
:
:>
:;
9
7
6
5
