/
Your appliance was cleaned and polished before it left the factory.
/
Before use, dust and wipe over inside and out, using a clean dry cloth.
/
This product is designed to operate on a power supply of 220 / 240 volts 50 hertz.
/
Connect to a separate power point with a correctly earthed three pin socket.
/
Do not use double adaptors.
Page 7
Initial Start-up
The refrigerator transfers heat from food placed inside the refrigerator to the outside air. This
process makes the rear, the sides and the area adjacent to the doors feel warm, particularly at the
initial start up. This is normal.
Make sure you fully close the refrigerator door after you load or remove food.
Ensure shelves are pushed completely back to prevent them holding the door open.
If the unit is unplugged, power lost, or turned off, you must wait 5 minutes before restarting the unit. If
you attempt to restart before this time delay, the refrigerator will not start.
Controlling The Temperature In The Refrigerator Compartment
Controlling The Temperature In The Freezer Compartment
/
When the control knob is turned to its lowest setting and past the point of resistance, the
appliance will not operate.
WARNING!
Power is still supplied to the appliance.
/
To make the refrigerator operate, you must turn the knob clockwise.
/
For all models value 'Less Cold‘ corresponds to the warmest temperature and value 'Colder’
the coldest.
/
When the ambient room temperature is 16ºC, a setting of half way between ‘Less Cold’ and
‘Mid’ would be appropriate.
/
When the ambient room temperature is 25ºC, a setting of half way between ‘Mid’ and ‘Colder’
could be selected.
WAIT 24 HOURS AFTER CHANGING SETTINGS:
When you change temperature settings, make small adjustments and wait 24 hours before
assessing whether you need to make any further changes.
/
For optimum (best) performance, position the freezer control on ‘Less Cold’.
/
If the food is not frozen enough, you may be required to move the slide control towards the
‘Colder’ position.
Defrosting
Defrosting takes place automatically. The defrost water flows down to the evaporating tray,
which is located in the machine compartment, and is evaporated automatically.
Refrigerator / Freezer Operation
The freezer slide control is used to balance the air flow between the freezer and the refrigerator
compartments. The main temperature control is the control knob in the refrigerator compartment.
Содержание RJ182T
Страница 1: ......
