09/2017
E 2/7
Crystalline Panel
Protective Film
INSTALLATION
1. Prior to installation download the app to ensure phone compatibility. Download the
Westinghouse Smart Landscape App for free from the App Store or Google Play. You
may also scan the QR codes below. This App is compatible with iPhone (4 generation
or above) and Android™ devices (5.0 or above).
2. Ensure that Bluetooth is enabled on your cellular device and make it discoverable.
The way you do this depends on the device. If you need help visit the manufacturer's
website to learn how.
3. Spotlights include a "Parent" and "Child" light. The light with
the large sticker on top is the "Parent”. This light also has a
reset button located under the solar panel. Only the "parent"
light will operate independently. With the solar panels facing
darkness. The “Parent” light power switch must be turned
!
take 15 to 30 seconds for both lights to illuminate equally.
#$%%
stickers.
RESET BUTTON
Parent Light
Child Light
5. Attach (Part A) to (Part C) by aligning the holes, then insert
(Parts B & D) and tighten (Part B) until secure. To adjust the light
head, loosen (Part B) and position the light head. When desired
position is achieved, tighten (Part B) until secure. To adjust the
solar panel loosen the wing nut and position the panel. When
desired position is achieved, tighten wing nut until secure. Carefully
insert (Part C) into the ground where desired. Push the stake into
the ground until the top collar is even with the ground surface.
NOTE: If the ground is hard and packed, moisten the ground with
water before inserting the stake to avoid breakage.
ASSEMBLY
(SOME PARTS MAY COME PRE-ASSEMBLED)
6. Install solar light where it will receive direct sunlight for at least 8
hours each day. Avoid shadowed locations and install away from
nighttime light sources which will prohibit the light from working properly.
