ASSEMBLY
FEATURES
4
This angle grinder has been designed for professional grinding and cutting applications. This angle grinder has been
designed for grinding and cutting applications. Please refer to Fig. 1 to familiarize yourself with the major components of
this tool before using it.
1. Spindle Lock
2. Lock-on Switch
3. Auxiliary Handle
4. Wheel Guard
5. Quick Release Lever
6. Outer Flange
Prior to assembly and adjustment always unplug the tool.
Installing the Grinding Wheel
1. Depress and hold down the spindle lock. To prevent damage to spindle or spindle lock, always allow motor to
come to a complete stop before engaging spindle lock.
2. Remove the outer flange with spanner turning in anti-clockwise direction. Do not remove the inner flange.
3. Make sure the slot on the inner flange is engaged with the square neck of the spindle.
4. Place the grinding wheel over the spindle with the depressed center against the inner flange(see Fig.3).
5. Depress and hold down the spindle lock again, mount the outer flange and securely tighten it with spanner
provided clockwise.Do not overtighten it.
Mounting the Auxiliary Handle
The tool has three screwed holes on top, left and right side of the gear housing. Operators can choose any one of
them to mount the auxiliary handle depending on specific working condition and their own habit.
Adjusting the Wheel Guard
This tool is fitted with a wheel guard. The closed segment of the guard can be adjusted to different angles.
1. Pull the quick release lever toward outside so as to enlarge the circular collar of wheel guard.
2. Turn the wheel guard to a desired angle. Pull back the quick release lever to lock the guard.
3. Make sure the guard is firmly secured in place. If the guard is too loose after pulling back the quick release lever,
pull up the lever, properly adjust the nut on the guard and pull back the lever again.
6
1
2
3
4
5
Содержание PT20360
Страница 9: ...9 EXPLODED VIEW...
Страница 10: ......
