Westinghouse PT10475, Инструкция по эксплуатации, Страница: 3 / 14

8 2
13 3
GENERAL POWER TOOL SAFETY WARNINGS
LISTA DE PARTES
e) When operating a power tool outdoors, use an extension cord suitable
for outdoor use. Use of a cord suitable for outdoor use reduces the risk of
electric shock.
f) If operating a power tool in a damp location is unavoidable, use a
ground fault circuit interrupter (GFCI) protected supply. Use of a GFCI
reduces the risk of electric shock.
3) PERSONAL SAFETY
a) Stay alert, watch what you are doing and use common sense when
operating a power tool. Do not use a power tool while you are tired or
under the influence of drugs, alcohol or medication. A moment of
inattention while operating power tools may result in serious personal
injury.
b) Use personal protective equipment. Always wear eye protection.
Protective equipment such as dust mask, non-skid safety shoes, hard hat,
or hearing protection used for appropriate conditions will reduce personal
injuries.
c) Prevent unintentional starting. Ensure the switch is in the off-position
before connecting to power source and/or battery pack, picking up or
carrying the tool. Carrying power tools with your finger on the switch or
energizing power tools that have the switch on invites accidents.
d) Remove any adjusting key or wrench before turning the power tool on.
A wrench or a key left attached to a rotting part of the power tool may
result in personal injury
e) Do not overreach. Keep proper footing and balance at all times. This
enables better control of the power tool in unexpected situations.
f) Dress properly. Do not wear loose clothing or jewellery. Keep your hair,
clothing and gloves away from moving parts. Loose clothes, jewellery or
long hair can be caught in moving parts.
g) If devices are provided for the connection of dust extraction and
collection facilities, ensure these are connected and properly used. Use of
dust collection can reduce dust-related hazards.
4) POWER TOOL USE AND CARE
a) Do not force the power tool. Use the correct power tool for your
application. The correct power tool will do the job better and safer at the
rate for which it was designed.
b) Do not use the power tool if the switch does not turn it on and off. Any
power tool that cannot be controlled with the switch is dangerous and
must be repaired.
c) Disconnect the plug from the power source and/or the battery pack
from the power tool before making any adjustments, changing
accessories, or storing power tools. Such preventive safety measures
reduce the risk of starting the power tool accidentally.
d) Store idle power tools out of the reach of children and do not allow
persons unfamiliar with the power tool or these instructions to operate
the power tool. Power tools are dangerous in the hands of untrained
users.
NO CANT
1 1
2 7
3 2
4 1
5 2
6 2
7 1
8 1
9 1
10 1
11 1
12 1
13 1
14 1
15 1
16 1
17 1
18 1
19 1
20 1
21 1
22 1
23 1
24 1
25 1
26 1
27 1
28 1
29 1
30 2
31 2
32 1
33 1
34 1
35 1
36 1
37 1
38 2
39 1
40 1
41 1
42 1
Hoja de sierra
DESCRIPCION
Carcasa izquierda
Tornillo rosca ST3.9X19
Tornillo rosca ST3.9X39
Base de pie
Placa de ajuste
Tornillo de ajuste M4X16
Resorte de torsión
Rueda excéntrica
Pin de soporte
Soporte de rodillo
Arandela
Protector de dedos
Resorte
Cojinete frontal
Ensamblaje de émbolo
Cojinete trasero
Bush
Engranaje
Contrapeso
Barra péndulo
Placa conectora
Resorte de cierre
Llave Allen 3
Rodamiento de agujas
Soporte de cojinetes
Cojinete 608-2RS
Abanico
Rotor
Cepillo de carbón
Portador de cepillo
Soporte de portador de cepillo
Cojinete 607-2RS
Estator
Manga de cable
Cable de conexión
Liberación de tensión
Tornillo rosca ST3.9X14
Conector de polvo
Carcasa derecha
Interruptor
PCB
43 1
44 1
45 1
46 1
47 1 Resorte de cierre
Perilla péndulo
Resorte
Bola
Arandela