Westinghouse PHN668U, Руководство пользователя

Страница: 9 / 16

If the appliance has been wrongly operated, the visit from the customer service
technician or dealer may not take place free of charge, even during the warranty
period.
Technical Data
Model PHN 668U
PNC 949 163 047
Product dimensions (w x d) mm 610 x 515
Cut-out dimensions (w x d) mm 560 x 490 (485)
Voltage (volts) 230
Cycles (Hz) 50
Service Cord Not fitted
Elements No. zones Watts
Left front 2 2200/750
Left rear 1 1200
Right front 1 1200
Right rear 1 1800
Total 6400
Disposal
The symbol on the product or on its
packaging indicates that this product may
not be treated as household waste. Instead
it should be taken to the appropriate
collection point for the recycling of electrical
and electronic equipment. By ensuring this
product is disposed of correctly, you will help
prevent potential negative consequences for
the environment and human health, which
could otherwise be caused by inappropriate
waste handling of this product. For more
detailed information about recycling of this
product, please contact your local council,
your household waste disposal service or the
shop where you purchased the product.
Packaging material.
The packaging materials are envi-
ronmentally friendly and can be re-
cycled. The plastic components are
identified by markings, e. g., >PE<,
>PS< etc. Please use markings to
dispose of the packaging materials
in the appropriate container at the
community waste disposal facilities.
Installation Instructions
Warning! Safety instructions
Warning! This must be read! The laws,
ordinances, directives and standards in
force in the country of use are to be
followed (safety regulations, proper
recycling in accordance with the
regulations, etc.)
Important! Installation may only be carried
out by a qualified electrician.
The minimum distances to other appliances
and units are to be observed.
Anti-shock protection must be provided by
the installation, for example drawers may on-
ly be installed with a protective floor directly
underneath the appliance.
The cut surfaces of the worktop are to be
protected against moisture using a suitable
sealant. The sealant seals the appliance to
the work top with no gap. Do not use silicon
westinghouse 9