background image

Overriding the child safety device

The child safety device can be switched off in this way for a single cooking session; it remains
activated afterwards.

Step

Control panel

Display/Signal

1.

 Switch the appliance on

2.

Touch

 of both the cooking zones at the front simultane-

ously for 4 seconds.

Until the appliance is next switched off, it can used as normal. After switching off the appliance, the
child safety device is active again.

After overriding the child safety device, a
heat setting or a function must be set
within approx. 10 seconds, otherwise
the appliance automatically switches it-
self off.

Automatic switch off
Cooking surface

• If after switching on the cooking surface, a

heat setting is not set for a cooking zone
within approx. 10 seconds, the cooking
surface automatically switches itself off.

• If one or more sensor fields are covered by

objects (a pan, cloths, etc.) for longer than

approx. 10 seconds, a signal sounds and
the cooking surface switches off automat-
ically.

• If all cooking zones are switched off, the

cooking surface automatically switches it-
self off after approx. 10 seconds.

Cooking zones

If one of the cooking zones is not switched
off after a certain time, or if the heat setting is
not modified, the relevant cooking zone
switches off automatically. 

 is displayed.

Before being used again, the cooking zone
must be set to 

.

Heat setting

Switches off after

 - 

6 hours

 - 

5 hours

4 hours

 - 

1.5 hours

Tips on cooking and frying

Information on acrylamides

According to the latest scientific knowl-
edge, intensive browning of food, espe-
cially in products containing starch, can
constitute a health risk due to acryla-
mides. Therefore we recommend cook-
ing at the lowest possible temperatures
and not browning foods too much.

Cookware

• You can recognise good cookware from

the bottoms of the pans. The bottom
should be as thick and flat as possible.

• Cookware made of enamelled steel or with

aluminium or copper bottoms can leave
discolorations on the glass ceramic sur-
face which are difficult or impossible to re-
move.

Energy saving

Always place cookware on the cooking
zone before it is switched on.

Switch cooking zones off before the end
of the cooking time, to take advantage
of residual heat.

If possible, always place lids on the
pans.

 westinghouse

Содержание PHN668U

















Отзывы: