6 of 9
ISSUED: 05-21-04 SHEET #: 201-9226-1
Visit the Westinghouse Web Site at www.westinghousedigital.com
For customer service call
1-866-287-5555
.
Use four M6 screws (
M
) to attach top plate (
P
) to bottom plate (
Q
) using phillips screwdriver (not provided).
NOTE:
Top plate (
P
) will have one set of threaded holes on one side and a set of non-threaded holes on the other
side. Bottom plate (
Q
) will also have one set of threaded holes on one side and a set of non-threaded holes on the
other side. All four M6 screws (
M
) should pass through non-threaded holes first and into threaded holes.
P
Q
P
Q
FOR VESA 100 MOUNTING PATTERN
Use four M4 screws (
R
) and four bushings (
S
) to
attach bottom plate (
Q
) to flat panel using phillips
screwdriver (not provided). Use four center holes of
bottom plate (
Q
) as shown below.
M
Q
S
FLAT
PANEL
FOR VESA 100 X 200 MOUNTING PATTERN
Use six M4 screws (
R
) and six bushings (
S
) to attach
bottom plate (
Q
) to flat panel using phillips screwdriver
(not provided). Use six slots on bottom plate (
Q
) as
shown below. Align upper end of slots with flat panel
mounting holes.
100 x 200
MOUNTING
PATTERN
Q
S
FLAT
PANEL
R
VESA 100
MOUNTING
PATTERN
R