Westinghouse GOL472, Руководство пользователя

Страница: 37 / 48

37
CATALYTIC SELF CLEAN PANELS (where fitted)
These Ovens Contain:
2 Catalytic Liners
1 Catalytic Fan Cover
NOTE: If your oven does not have catalytic self clean panels and you wish to purchase them, they
are available from Spare Parts.
Operation
Catalytic self clean panels are coated with a specially formulated enamel coating, over a base of
regular enamel. This enamel coating has a rough surface which is also porous. During normal
cooking, fats and other food spatter is partially absorbed into the surface and then oxidises away.
This oxidisation of the fat works best if the oven is set at high temperatures. Users will find that
if they do a lot of lower temperature baking, say around the normal 180ºC, then the cleaning
process may not be complete. Every now and then the user should turn the oven on to 260ºC for
around one hour to completely remove the soil.
Cleaning
Should the panels become heavily soiled, they will need to be taken out of the oven and cleaned
by hand. They should be soaked in warm, soapy water for at least 2 hours and then wiped clean
with a soft cloth. Solid cleaning powders, creamy cleansers, caustic oven cleaners, steel wool or
other scourers will ruin the catalytic surface and must
NEVER BE USED .
Removing the catalytic liners
• Grasp the shelf supports at the front.
• Pull them inwards.
• Separate the catalytic liners from the
shelf supports.
Installing the catalytic liners
• Align the shelf support to the catalytic liner by
aligning the rails with the corresponding holes.
• Ensure the catalytic surface is facing the shelf
support.
• Clip the shelf support to the catalytic liner.
• Fit the liner and shelf support assembly to the
rear hook to the rear hole in the oven. Then
locate the front peg into the front hole and push
in firmly.