7
SAA-Urban Gale-Australia-WH18
PrePArInG fOr InStAllAtIOn
For downrod fans, slide the canopy up to the mounting bracket.
3
1
2
7
The canopy has two mating slots (1) and two mating holes (2). Position both slots on canopy directly under and in line with two screws in the mounting bracket (3). Lift the
canopy, allowing the two screws to slide into the mating slots. Rotate the canopy until both screws from the mounting bracket drop into the slot recesses. Tighten screws
securely. Install two screws into the mating holes of the canopy and tighten to secure the canopy to the mounting bracket.
