7 CONGLOMKB .COM
Please contact
or
+61-2-968-127-62
for further assistance .
ENGLISH
Installation (continued)
If at any time the bottom supporting ring becomes disengaged from
the body of the waste disposer, then:
1 . Align the slot in the bottom supporting ring with tab on the
waste disposer body .
2 . Lower the bottom supporting ring and make the slot fit in the
tab .
3 . Turn the bottom supporting ring counter clockwise to secure it
in place .
ATTACHING DISCHARGE ELBOW
- Make sure the elbow gasket is attached to the discharge elbow
correctly (see Fig . 9a) .
- Connect the discharge elbow to the disposer (see Fig . 9) .
Slot
Tab
Elbow Gasket
Groove
Discharge Elbow
Fig . 9a
Fig . 9
REMOVING KNOCKOUT PLUG
(SKIP THIS STEP IF YOU DO NOT HAVE A DISHWASHER)
If you are using a dishwasher, complete the following procedure . If no
dishwasher is to be connected, skip this section .
- Using a blunt instrument (steel punch or wooden dowel),
knock out the entire plug (see Fig . 10) . Do not use a
screwdriver or sharp instrument . When the knockout plug falls
into the disposer, you may remove it, or grind it up when the
disposer is being used . This will not damage the disposer in
any way, but may take some time to grind .
Fig . 10
Knockout
Plug
Wood or
Metal Dowel
